Traffic Control SPIKES
Are You Tired of people entering your property
Tired of people entering thru the exit lanes
Tired of people slipping under your gate
A simple SOLUTION TO direct traffic flow
Positive unattended one way traffic control-
Note Traffic Warning signs are also available in dual sided illuminated
Traffic control products are ideal for controlling traffic direction and speed through a controlled entry location.
Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction
spikes enforce one-way traffic lanes.
Prevent vehicles from entering thru slow closing exit gates
Great went used for gated communities
use a gate for entrance and unattended traffic spikes for exit points
Facts: there are several Models of traffic spikes panels
1) surface mounted 3 foot panels as show above available in latch down and non latch model
2)surface mounted 3 foot panels with heavy duty ramp from 1/4" TO 3/8" to 1/2" thick -for heavy axel loads
options included: Zinc Coating for beach areas or extremely salty wet areas
In Ground Models
These units are available in 3 and 6 ft sections-
In ground or flush mounted models
available in a latch down or non latch model
which requires trenching of asphalt or concrete
Theses units are available in 3 foot or 6 foot sections
(note freight on 6ft. units is much higher)
these Units are available with a 1/4" standard 3/8 " or 1/2 super heavy duty top plate
for extremely heavy loads 30,000lbs loads per axel - i.e. semi trucks military vehicles etc. available on DC Models Only
Why Latch Down Option
NOTE: the latch down option-allows you to place teeth in a down position at will to allow Bi directional traffic flow as needed
In ground flush mounted-latch down MODELS are available in 3 foot length or a 6 foot length
also the in ground units are available with a 1/4 " 3/8 "HD or 1/2" HD top plate for heavy loads semi trucks etc.
Features you should know about when it comes to traffic spike
Designed to last several lifetimes when properly maintained
Designed from 1/4" steel plate and will carry axel loads of CARS or personal operational vehicles
these units are designed and recommended for personal operational vehicles facilities
in dry climates a periodic vacuuming of dirt and debris will extend the life
Available in a Latch Down Model locks the teeth in the down position - for Bi Directional use:
Latch Down Feature: (optional)
For locations where it is desired to occasionally deactivate the controller, the module can be supplied with a Latch down option.
This locks down the teeth in a down position allowing free flow of traffic in both directions. the use of a 3/16 Alan wrench is all that is needed
Using the unique key only a few seconds per module is required to lock and unlock the teeth position.
Easy Attachment:
A 2 part epoxy cement is all required to attach the modules to concrete or asphalt driveways.
2 part epoxy is available with an applicator dispenser as well as a two part glue
ADDITIONALLY MOUNTING HOLES (6 per 3 ft panel) are optional as you can use fasteners to secure in concrete
ARE PRE DRILLED SHOULD YOU WANT TO ANCHOR BOLT IN THE INSTALLATION into cement
Spike Panels 3 foot sections
Available in 3 ' Foot panels with a ramp height of only 3" 1/4" COLD ROLLED STEEL
Model SPDC-36" NON latch MODEL
3 foot is a non latch panel for above ground installation
Model SPDC-36 above ground
1/4" Ramp and Standard Top Plate - weight 135 lbs. +s/h
1-12 qty 3' foot Sabre Tooth Panel (Non latch) down teeth model $ 595 .00 ea.
Note: weight per panels is 135 lbs each
PLEASE NOTE:
FREIGHT CHARGES WILL BE CALCULATED BASED ON THE QUANTITY AND THE DESTINATION ZIP CODE,THE CUSTOMER WILL BE ADVISED OF THE FREIGHT CHARGES PRIOR TO THE ORDER BEING PROCESSED OR SHIPPED
SPDC-36-LATCH 3’ foot STANDARD PANEL 1/4" Plate with ("latch down feature")
1- 12 qty 3 FT SECTION PANELS $ 775.00 each + s/h
SPDC-36-Non latch HEAVY DUTY 3’ foot panel SURFACE MOUNT WITH NON LATCH TEETH
HEAVY DUTY 1/2 THICK TOP PLATE
WITHOUT ("latch down")
1- 12 qty 3 FT SECTION PANELS $ 975.00 each + s/h
SPDC-36- LD/ HD 3’ foot panel SURFACE MOUNT WITH LATCH DOWN
HEAVY DUTY 1/2 THICK TOP PLATE WITH ("latch down")
1- 12 qty 3 FT SECTION PANELS $ 1175.00 each + s/h
with Latch down Feature
THE SURFACE MOUNTED 3 FOOT SP-CS-36 SM Surf
OPTION # 1
ace Mount -with LATCH DOWN
COMES WITH A 1/4" TOP PLATE-
Designed for an axel load of up to 22,000 lbs
1-TO 12 QUANTITY $ 695.00 EACH -PLUS FREIGHT
DESIGNED FOR GENERAL (PERSONAL OPERATIONAL VEHICLES)
OPTION # 2
UPGRADE TO A 3/8" RAMP PLATE FOR HEAVIER USAGE BY- SEMI TRUCKS add $200.00 ea. panel
Designed for an axel load of up to 30,000 lbs Just $875.00 PER PANEL -each
OPTION # 3
Standard 1/4" plate or ramp with Zinc coating
3 FT SECTIONS ABOVE OR IN GROUND -
Zinc Coated for Salt filled environmentsTEETH AND BEARING BLOCK TO PREVENT RUST-FOR Beach WET LANDS
PER 3' PANEL cost of $875.00 each PANEL plus freight
Note: zinc coat then Painted
Option #4
Standard 3/8" plate or ramp zinc coated with Heavy duty top Plate
3 FT SECTIONS ABOVE OR IN GROUND -
Zinc Coated for Salt filled environmentsTEETH AND BEARING BLOCK TO PREVENT RUST-FOR Beach WET LANDS
With
UPGRADE TO A 3/8" RAMP PLATE FOR HEAVIER USAGE BY- SEMI TRUCKS add $200.00 ea. panel
Designed for an axel load of up to 30,000 lbs
PER 3' PANEL cost of $1075.00 each PANEL plus freight
A Great Price for a
Latch down Model Traffic Controller with Latch Down Feature
The In -ground
SPCS36FM flush-mounted traffic controller WITH A 1/4" TOP PLATEis designed to regulate the flow of traffic through a secured control point, by providing both a visual and physical barrier.
This unattended, one-way traffic controller will work with any width roadway by installing 36" modules end-to-end.
This is an in ground panel that is mounted to a flat concrete surface
|
Length: |
Available in 36" or 72" modules |
|
Height: |
Spikes - 2 1/4" above grad |
|
Weight: |
125 lbs. per 36" module. |
|
Features: |
Long life steel alloy torsion springs (chrome vanadium), 3/8" laser-cut top plates, zinc-plated teeth, welded steel frame. Latch down kit standard on all units. |
option #
1SP-CS36FM 3 FOOT PANEL 1/4" TOP PLATE-& latch down teeth
1 TO 11 UNITS $ 695.00 each - Special $ 675 .00 each
option #2
SP-CS36FM 3 FOOT PANEL- 3/8" heavy duty model 30,000 lbs. Axel Wt. $ 875.00 each + freight
Option #3
SP-CS36FM 3 FOOT PANEL- With Standard Top plate- COMPLETELY Zinc Coated for Salty wetlands
TEETH/BEARING BLOCK-FRAME-TOP PLATE ALL GALVANIZED
cost of $995.00 each plus freight
Option #4
SP-CS36FM 3 FOOT PANEL- With 3/8" heavy Duty Top plate- COMPLETELY Zinc Coated for Salty wetlands
TEETH/BEARING BLOCK-FRAME-TOP PLATE ALL GALVANIZED
cost of $1075.00 each plus freight
Model SPDC-72" 1/4" TOP PLATE flush mount in ground spike panel-6 FOOT PANEL
DC Models 6’ foot below grade directional traffic controller
Model Directional Controller 72" or 6 foot NON-LATCH-Panel Model
This is an in ground flush mounted traffic control device Panel
(1- 12 panels ) SPDC-72-NLD- STD 1/4 " top Plate $ 995.00 each Non latch down teeth model plus freight 185lbs
(1- 12 qty units ) SPDCLD 1/4" top plate latch down Models in ground units $ 1450.00 each
SUPER HEAVY DUTY MODEL 1/2" STEEL Top Plate COLD ROLLED Steel
Model SPDC 72LD/ Super Heavy duty available in Standard 6 foot
latch down 1/2" heavy duty metal Cold Rolled Steel (semi truck Axle Loads) $1878.00Model SPDC 72NL/Super Heavy duty available in Standard 6 foot
non latch 1/2" heavy duty metal Cold Rolled Steel (semi Truck axle loads) $ 1778.00
CS Models 6’ foot with latch down Feature for below grade Installation
(1- 12 panels SPCS-72LD -Standard top plate 1/4" SPECIAL $ 1195.00 each latch down teeth model plus freight 200lbs
(1- 12 panels SPCS-72-LD-Standard top plate 1/4" Zinc Coated $ 1495.00 each latch down model plus freight
1- 12 panels SPCS-72 -Latch Down- Heavy Duty top Plate 3/8" top Plate SPECIAL $ 1750.00 each plus freight
1- 12 panels SPCS-72 Latch Down -Heavy Duty 3/8" top plate -Zinc coated SPECIAL $ 1950.00 each
SP DC 72 LD LATCH DOWN (NON Penetrating Model )
Model SPDC 72 or DC 72 LD Non latch & latch down Models (1- 12 qty ) $ 1295.00
(Latch down NP) teeth model plus freight 125 lbs
Where Peace of Mind Begins
Motorized Traffic Spikes
Click here to see Traffic Warning signs: Click Here
For more information on the traffic controllers
available in several models more info
click here
We have your Sign Click here
CALL FOR A PRICE QUOTE TODAY
Call 1800-289-6697
WHEN SPIKES ARE NOT ENOUGH CONSIDER THIS
Call toll free Today 1800-289-6697
915-240-4747
Office hours 9 am to 6 pm M.S.T.
METAL DETECTORS -- TRANSACTION HARDWARE- TRAFFIC CONTROL PRODUCTS - HOMELAND SECURITY PRODUCTS - LIFT GATES -- BARRIERS-
MONEY COUNTERS - COUNTERFEIT DETECTION - ALARM & EMERGENCY DIALERS - GUARD HOUSES & HUTS
INSPECTION MIRRORS - CCTV EQUIPMENT & DVR CAMERA SYSTEMS- HAND HELD DETECTORS - SELF DEFENSE PRODUCTS
HOME SECURITY PRODUCTS - RETAIL LOSS PREVENTION- ACCESS CONTROLS AND LOCKS
BUILDING SECURITY PRODUCTS- PHOTO IDENTIFICATION PRODUCTS - X RAY SCANNERS
Call toll free Today
1800-289-6697
915-240-4747
