FeelSafer.com  

Where Peace of Mind Begins

  Talk Through for  TICKET WINDOW COMMUNICATION

 Window Grill Speak Thrus consists of two   5" 1/8"  grills  with one  center screw  may be used on various thickness of glass

 

 

Model Standard aluminum  window Grill Plates
 

 un polished Aluminum Speak-Thru Window Grill

consists of two plates ,2 cork washers & one center screw,screw length can vary for different thickeness of glass

 

 Can Be Used With Glass up to 1/4" (6 mm) Thick  or thicker with a longer screw

Designed to allow audible transmission of voice requests at ticket windows, box offices and more.

Designed  to prevent tampering from the outside, and stop drafts to the interior. 

 Each unit is individually boxed with cork gaskets and mounting screw  for installation on glass up to 1/4 inch (6 millimeter) thick.

For thicker glass up to 3-3/4 inch a cut down screw of  four inches will be required

This Model Requires  a minimum hole diameter of 2-1/4 inch   and will cover holes up to 4-1/4 inch  as the unit is 5 1/8" in diameter

 Recommended hole diameter is three to four inches for best sound transmission

does not amplify the voice

Note this  is a Grill   Not a  Amplified  intercom as pictured below

$ 77.00 each plus shipping

 

 

 

Model  Polished aluminum


  
Bright Anodized  Aluminum No-Draft Speak-Thru

 

Can Be Used With Glass up to 1/4" (6 mm) Thick 

No-Draft Speak-Thru  are designed to allow audible transmission of voice requests at ticket windows, box offices and more. They prevent tampering from the outside, and stop drafts to the interior. T  Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6 millimeter) thick. For thicker glass up to 3-3/4 inch (95 millimeters), you must use the optional four inch (102 millimeter) screws. This Unit require a minimum hole diameter of 2-1/4 inch (57 millimeter), and will cover holes up to 4-1/4 inch (108 millimeter). Recommended hole diameter is 4 inches

 

  $87.00 each plus shipping

 

 

Model  Black Finish
  

Duranodic Bronze   Aluminum No-Draft Speak-Thru

 

Can Be Used with Glass up to 1/4" (6 mm) Thick

 

 Speak-Thru are designed to allow audible transmission of voice requests at ticket windows, box offices and more. They prevent tampering from the outside and stop drafts to the interior.   Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6 millimeter) thick. For thicker glass up to 3-3/4 inch (95 millimeters), you must use the   four inch  cut down screw , requires  a minimum hole diameter of 2-1/4 inch (57 millimeter), and will cover holes up to 4-1/4 inch (108 millimeter). Recommended hole diameter is 4 inches

$ 97.00 Each  plus shipping

 

 

 

Model  Bright Gold speak thru
  

Bright Gold Anodized Finish Aluminum No-Draft Speak-Thru

 

  Fits Glass up to 1/4" (6 mm) Thick

 

 designed to allow audible transmission of voice requests at ticket windows, box offices and more. They prevent tampering from the outside and stop drafts to the interior. Each unit is individually boxed with gaskets and mounting screws for installation on glass up to 1/4 inch (6 millimeter) thick. For thicker glass up to 3-3/4 inch (95 millimeters), you must use the optional four inch screws Speak-Thru require a minimum hole diameter of 2-1/4 inch (57 millimeter), and will cover holes up to 4-1/4 inch (108 millimeter). Recommended hole diameter is four inches

$ 107.00 each plus freight

 

 Non bullet resistant Model Speak thru Window Units

 Available in 5 inch and 7 inch Diameters 

NON BULLET RESISTANT RATED Higher Security Grills

Steel Speak-Thru available in 5 " and 7" provides natural voice transmission.

Offset slots in front and rear prevent tampering from the outside, and stops drafts to the interior.

Speak-Thru has a brushed stainless finish, and comes in two sizes.

Screws are included that will this item to accommodate glazing thicknesses of up to 1-1/4 inches (32 millimeters) thick

Provides Natural Voice Transmission

Eliminates Drafts LEVEL ONE

Eliminates Drafts LEVEL ONE

    7" diameter Price 1 unit  $ 245.00  plus shipping        4 + unit  $ 225.00  each plus shipping

 

 5" diameter Price 1 unit  $ 220.00  plus shipping     4 + unit  $ 200.00  each plus shipping

 

    

 

Screened Opening for Insect Free Environment

4" and 6" (102 and 152 mm) Models Available

in Two Finishes

Choice of Metal or Lucite Cover

Covered Speak-Thrus are available with two styles of covers: all metal, or metal outer ring with Lucite vision port.

Both styles are screened to provide an insect free environment.

These heavy duty units are available in satin anodized or duranodic bronze finishes.

Both 4 and 6 inch (102 and 152 millimeter) sizes are made to be glazed in 1/4 inch (6 millimeter) glass.

 

The four inch (102 millimeter) model requires a 3-1/2 inch (89 millimeter) diameter hole.

 4 SGMSC $185.oo each Metal cover

 4SGLSC  $165.oo each Lucite cover

 

The six inch (152 millimeter) model requires a 5-1/2 inch (140 millimeter) diameter hole.

6SGMSC $226.oo each Metal cover

 6SGLSC $199.oo each Lucite cover

Speak Thru Grills

Bullet Resistant Speak Thru Grills

Correctional Speak Thru Intercoms

Intercoms for ticket windows

Call for Quantity discounts

Major Credit Cards Accepted

 Product Questions: 915-240-4747

 

 

6" Round Heavy Stainless Steel

Level 3 Bullet Resistant Speak-Thru

 6" Round Heavy Stainless Steel Level 3 Bullet Resistant Speak-Thru

is designed for use with bullet resistant glass, acrylic or polycarbonate.

 Made of heavy stainless steel, the concentric circular louvers are spaced to deflect projectiles entering the cavity between the interior and exterior surfaces without interfering with conversation.

Accommodates glazing thicknesses from 1-3/16 to 1-7/8 inch (30 to 48 millimeter).

 

 

For Information Call 915-240-4747

NON bullet Resistant Speak Thru Grill Not Rated

Steel Speak-Thru available in 5 " and 7" provides natural voice transmission. Offset slots in front and rear prevent tampering from the outside, and stops drafts to the interior. Speak-Thru has a brushed stainless finish, and comes in two sizes. Screws are included that will this item to accommodate glazing thicknesses of up to 1-1/4 inches (32 millimeters) thick

 

 

5" Square  Bullet Resistant Speak-Thru

 S5L2  $ 177.00 available in level 2   bullet resistant call for price

 S5L3  $ 195.00 available in level  3 bullet resistant call for price

7" square Speak thru  cover Bullet Resistant

 

 S 7C2  $ 210.00 available in level  2 bullet resistant call for price

Level 3

  S7C3  $ 245.00 available in level  3 bullet resistant call for price

 

 

 

Clear Vision Bullet Resistant Speak-Thrus

Virtually Unobstructed Vision

Disc Overlap Prevents Direct Entry of Projectiles While Allowing Natural Voice Transmission

 

With  two levels of protection {Level 1 and Level 3 } and a clear field of vision.

The unit is easy to install. Just drill a six inch (152 millimeter) diameter hole in the bullet resistant window, surrounded by three 5/16 inch (8 millimeter) holes spaced at 120 on a 7-1/2 inch (190 millimeter) diameter (template included).

Then secure the 10 inch (254 millimeters) Acrylic or Lexgard Disc using the Stainless Steel Studs provided with the unit.

The space between the window and disc allow for clear voice transmission.

 The 10 inch (254 millimeter) disc provides enough overlap to prevent direct entry of projectiles.

Backer 101 $ 350.00 plus freight  for Level level 1 bullet Resistance Protection

Backer 101 $ 375.00 plus freight  for Level level 2 bullet Resistance Protection

Backer 101 $ 395.00 plus freight  for Level level 3 bullet Resistance Protection

Note : can only be installed on Polycarbonate  or acrylic bullet resistant  , and Lexguard

 

 

Clear Vision Bullet Resistant Speak-Thrus not only offer two levels of protection but provide a clear field of vision. The unit is easy to install. Just drill a six inch (152 millimeter) diameter hole in the bullet resistant window, surrounded by three 5/16 inch (8 millimeter) holes spaced at 120 on a 7-1/2 inch (190 millimeter) diameter (template included). Then secure the 10 inch (254 millimeters) Acrylic or Lexgard Disc using the Stainless Steel Studs provided with the unit. The space between the window and disc allow for clear voice transmission. The 10 inch (254 millimeter) disc provides enough overlap to prevent direct entry of projectiles.

Backer 103 $ 450.00 plus freight  for Level level 1 bullet Resistance Protection

Backer 101 $ 475.00 plus freight  for Level level 2 bullet Resistance Protection

Backer 101 $ 495.00 plus freight  for Level level 3 bullet Resistance Protection

Note the size of the backer is 4 inches larger that the hole in your glass

Note : can only be installed on Polycarbonate  or acrylic bullet resistant  , and Lexguard

 

 

Amplified Ticket window Intercoms

 

 

 Note : if your like many ticket window and cant hear the customer you may need an amplified intercom

we offer several models as pictured below with 18 inch microphone  or with headset adapter plug

for holes larger than 3 inches an adapter plate is required 4" 5" 6" inch adapter plates are available

 

we also offer a Bullet resistant Adapter insert for bullet resistant applications

 

optional: you can get the unit with both the microphone and the headset plug we offer

plug in head sets with one ear and adjustable microphone

We also offer a Lithium battery powered model

If  you have difficulty hearing you might want to consider an Amplified Intercom  starting at $ 745.00

 cid:image005.png@01CD02AE.16A85CB0

For Amplified  Window Intercoms  click here

Need To Hear clearly in High noise areas ?

 

 

Amplified Speak Thru Intercoms - Cutting of glass required

 

Need To Hear clearly in High noise areas ?

If  you have difficulty hearing you might want to consider an Amplified Intercom  starting at $ 745.00

   

For information on the Best Amplified  Window Intercoms  click here

 

Amplified Stadium Style Ticket window  Intercom

 

 Feelsafer.com

 915-240-4747

 

Bullet Resistant window Intercom s

 

Battery powered -Bullet Resistant

  

Battery powered Standard  model

 

 915-240-4747

 

Optional: Head Set for ticket office with a lot of noise

With Multiple Cashiers or ticket agents the sound in a small room can get loud

Head Sets are  available for loud to hear conditions

 

 

Desk mount with window thru glass model

The  SPTTU-1DB Rechargeable battery operated bullet-resistant ,

2-way communicator transaction intercom (shield rated up to .357 Magnum service loads) - battery included. Permits hands-free, 2-way communication between the booth attendant and the customer. Vox circuitry facilitates ongoing, clear, 2-way conversation at all times - as if the two parties were together in the same room. Unit work with standard bullet proof glass thickness of 1" to 2". If your glass is thicker than 2" please specify it at the time of ordering.

 

The SPTTU-1AB - Bullet Resistant Talk-Thru Communicator with noise reduction

 incorporates circuitry to automatically attenuate the outside channel.

 If the gooseneck microphone is not used for a period of 30 seconds, the outside channel volume will be reduced approximately 70%.

Normal operation is restored as soon as the attendant speaks into the gooseneck microphone.

The automatic volume attenuation circuit prevents outside noise from bothering the attendant.

 

FEATURES

Clear, 2-way hands-free voice communication.

Avoids shouting, repetition, misunderstanding.

Rugged, tamper-resistant materials.

Quality electronic design and engineering.

Simple, one-person installation.

Self-powered with rechargeable battery option.

Fast plug-in recharge. Bullet-resistant option.*

Export models available.

Units available for ADA applications.

Made in U.S.A.

MECHANICAL

  1. Outside face plate: Solid aluminum, anodized finish, tamper-resistant

  2. Control housing (inside): Machined aluminum, anodized finish, tamper resistant

  3. Size: Outside face plate 5 in. Dia. x 1/2 in. D. Inside control housing 5 in. D\ia. x 3 1/2 in. D ( for TTU-1D); 2 1/2 in. D (for TTU-1A) Microphone and gooseneck 18 in.

  4. Weight: lb

  5. Mounting: Partition hole 3 to 4 in. dia. (3 1/2 in. recommended) Specify barrier thickness when ordering

  6. Panel controls: Listen volume, talk volume, on-off switch, charger socket (battery unit)

ELECTRONIC

  1. Audio frequency response: Selectively shaped for maximum voice intelligibility

  2. Audio power: 2 watts per amplifier

  3. Distortion: Less than 2%

  4. Listen mode: 20 dB compression

  5. Talk mode: Vox

  6. Microphones: Electric

  7. Power supply/charger: Input: 120 VAC, 60 Hz Output: 12 VDC, 175 mA

  8. Useful duty time (battery unit): 10 to 12 hours per charge

  9. Charge time (battery unit): 5 hours for full charge. Unit can be used while charging

     

 

Battery Powered Model

Rechargeable battery operated  speak thru

Model SP-TTU-1D,

2-way communicator transaction intercom - battery included. Permits hands-free, 2-way communication between the booth attendant and the customer.

Vox circuitry facilitates ongoing, clear, 2-way conversation at all times - as if the two parties were together in the same room.

 

 

Standard and   Bullet Resistant window Intercom's

Models starting as low as  $ 750.00

with head set jack $ 750.00

With  Both $ 795.00

with bullet Resistant inserts up to level 3

with adapter plates for holes larger than 3 inches

optional  single ear piece  head set   and one flip Mic  $ 85 extra

 Battery powered -Bullet Resistant thru glass models available as well same sleek look

 

 

 

Amplified Speak Thru Intercoms - no cutting of glass required

Provides Clear Communication Through an Isolation Barrier

Ruggedly Constructed and Tamper-Resistant

Counter-Top Two-Way Electronic Communicator

is the unit of choice when it is impractical to cut a hole through a glass isolation barrier.

 The unit is automatically activated when the clerk speaks. Talk and listen volumes are adjustable by the clerk. Units are available in Standard or Deluxe Models with satin anodized finish Mechanical Specifications

Outside assembly: Machined aluminum, anodized finish, tamper-resistant
Inside assembly: Machined aluminum, anodized finish, tamper-resistant
Size (both assemblies):

6 in W x 2.375 in. H x 2.375 in. Diameter
Weight: 2 lbs (6 in. model
)

12 in W x 2.375 in. H x 2.375 in. Diameter
Weight: 3.5 lbs (12 in. model
 )


Mounting: Counter-top
Panel controls: Listen volume, talk volume, power on/off, LED power indicator
 

 

Correctional Series speak thru  intercom

Talk thru intercom corrections series- countertop model

 

Correctional facilities series intercom designed for low ambient noise environments that require an unobtrusive, yet tamper-resistant voice.

 

Correctional facilities series intercom designed for high-ambient noise environments and intended

for in-wall installations requiring flush-mounting

 Call 915-240-4747

 

 

Stadium /Counter Top Intercom

 

 
When a  Standard TRANSACTION TALK THRU UNIT intercom is  impractical, due to distance away from mic or a clerk is at a distant location

the A SPTTU7  TRANSACTION TALK THRU UNIT  is the communication TOLL  of choice.

The TRANSACTION TALK THRU UNIT-7 incorporates the Amplified Speak Thru signature faceplate,

 with a 1 in. deep inside DISK plate, and a separate counter mount control unit PRISM SHAPED DEVICE

How it Works


The Transaction Talk Thru Unit -SPTTU7 incorporates the same high-quality electronics as the basic  Amplified Speak Thru  
 

Features

 

Call 915-240-4747

Call for Pricing 915-240-4747

 

Major Credit Cards Accepted

 

 Product Questions: 915-240-4747

 FeelSafer.com