FeelSafer.com 

 

Where The World Can Find Security Products For Less !!!

 

Standard duty Motorized Spikes

Two Models To Choose From  both Above Ground and Flush In Ground Models Available

 System has  one Tunnel Section   measuring 3 feet  (3’-0”) Tunnel Section 1/4" steel next to Motor Box  with no traffic spikes

and 2 (3’-foot ” sections with Control spike in Modules  

 You Can add additional 36” control modules with teeth which are available for longer drive ways up  to  30 feet

Height: Ramp 3” above grade finish 

Finish: Safety Red Or Safety Yellow (please specify) 

Features: Cycle times of 1 second (red/green light cycles), custom programmable logic 

Time-proven hydraulic power units, and hydraulic actuators.

 

SURFACE  & SUB SURFACE MODELS

The  automated/motorized hydraulic, surface-mounted traffic controller is designed to regulate the flow of traffic through a secured control point, while providing a visual and physical barrier to approaching vehicles and preventing against unauthorized vehicles entering and/or exiting a secured area. The unit is surface-mounted to assist in the elimination of excavation and drainage problems

Optional– For Wet Weather Environments Get  ZINC COATING  each 3 foot  section  add   $150.oo per panel

Helps prevent water damage due to rust

 

Length: 1 (3') Tunnel Section and 2 (3') Control Modules with 36" control modules available
for lengths up to 30 Feet
Height: Spike 2 1/4"; Total 5 1/4"
Weight: 120 lbs. per 36" module
Features: Cycle times of 1 second optional: (red/green light cycles), custom programmable logic, time-proven hydraulic power units, and hydraulic actuators.

 

Accessories available:

Alarms, battery back-up, Red/ Yellow traffic lights. 

Basic System Cost

 Includes  1 three foot tunnel section 1/4" steel tunnel has  no teeth in section next to motor box

includes   2 qty  -  3' foot spike panel  1/4" Thick Steel sections $8,750.00 Plus Freight

Additional 3 Foot Sections are  $ 950.00 each plus freight

  extent  3 foot spike  sections up to 30 feet in total length or add 24 feet  or 7 additional  panels

 

Heavy Duty Motorized Traffic Spikes

  Works with or without Gate Arm

   

 

12 feet of Motorized Directional Traffic Spikes

With  3/8 “ Ramp Heavy Duty for Semi Trucks and large Heavy  Axel Loads-   

 includes one motor box assembly

  Motorized Surface Mount Traffic Spike System - 1/2 HP 115 VAC -

Standard System for heavy axel loads  $ 9,367.00

  Motorized Surface Mount Traffic Spike Extension - 3' foot Spike Section

Each Additional 3 foot extension panel is $1475.00 each plus freight 

 Optional : not included  accepts lift arm gate from  12-14' Arm 

Click here for Gate options

 

 

  Control the Flow of Traffic Entering and Exiting

Traffic tire spike systems are available in either above-ground or in-ground versions

Our tire spikes systems utilize a propriety spring-loaded and counter balanced system to prevent tire damage to out-bound vehicles. 

The teeth of our tire spikes are made of hardened steel for years of dependable service.

 

 This Model must be used with a lift arm gate-

 Automated Spike Systems are designed as a modular system allowing for easy flexibility in different applications and easy installation.

The   operator is designed with many advanced features and mechanically links the spikes to the barrier arm.

The surface mount spikes are easy to install and do not require any trenching or excavating.

The   auto-spike system is ideal for parking lots, rental car agencies, schools, car dealerships, government agencies, or in any application where a higher degree of traffic control is preferred.

A complete  auto-spike system consist of several different components.

A typical system will require an  operator, transfer box which is factory installed

as well as a tunnel section and spike sections as needed, with an end cap.

We have other gates available

1603-080

Barrier Operator 115 VAC / Auto-Spike

$3,894.00

1603-081

Barrier Operator 115 VAC / Auto-Spike w / DC convenience open

4714.00

1603-082

Barrier Operator 230 VAC / Auto-Spike (Note 2)

4324.00

1603-083

Barrier Operator 230 VAC / Auto-Spike w / DC convenience open (Note 2)

5144.00

1603-084

Barrier Operator 460 VAC / Auto-Spike (Note 2)

4324.00

1603-085

Barrier Operator 460 VAC / Auto-Spike w / DC convenience open (Note 2)

5144.00

 Model 9410-010 -  Plug-in single channel detector. Use with   operators only -$199.50

 Model 1601-260 - Foam padding kit for aluminum or wood arm- $ 65.00

 Model 1601-092 - Heater Kit $ 216.00

  Model 1601-093 - Fan Kit -$216.00

 9409-010 -   2-channel detector. Use with Gate  operators only - $378.00

 Select the length of the arm you need

1601-216

14-foot aluminum arm

 $ 216.00

1601-242

Aluminum Arm Hardware Kit (Arm NOT Included) Note 1

$ 150.00

1601-310

Aluminum arm and folding bracket assembly.

 $ 390.00

1601-048

14-foot wood arm

 $ 88.00

1601-240

Wood Arm Hardware Kit (Arm NOT included) Note 1

$ 120.00

1601-084

Wood arm and folding bracket assembly

$ 314.00

  

 Tunnel Sections Required for this Motorized Spike Operator

1603-192

Tunnel Section 2 Ft., Surface Mount

$ 984.00

1603-193

Tunnel Section 3 Ft., Surface Mount

$ 1400.00

 

 

FEELSAFER.COM

Click here to see Traffic Warning signs: Click Here

 

A traffic signal and/or warning sign is recommended with auto electric spike panels systems

Many systems integrate a lift gate

Traffic warning sign made of Lexan break resistant panels and photo sensor and Flood light with flange mount pole are $ 850.00 each plus freight

 

Click here for more info

 

FEELSAFER.COM

  CALL FOR A  QUOTE TODAY

 For Pricing Call 1800-289-6697

or email us your request

 

Please indicate  how many feet required & Surface or In-ground spike panels

 

  TOKEN CONTROLLER

See other options

Unattended TOKEN CONTROLLER for allowing access or exit at controlled check points

click here

 

 

FEELSAFER.COM

 

 CALL FOR A  QUOTE TODAY

Call 1800-289-6697

 Where Peace of Mind Begins

 

Security Product's Unlimited

Saves You Money

s