is recommended for applications requiring medium to medium-high sensitivity, typically to detect firearms. The column construction, both attractive and compact, allows it to be inserted with ease into public environments such as, for example, schools and discotheques. Programming of the device has been simplified as much as possible, and can be carried out with a minimum of training. The Classic Metal Detector has an extremely competitive price/performance ratio.

Column model with reduced gateway height designed to be installed on cruise ships. It is particularly suited to applications on decks with limited headroom. The Classic/Navy model is equipped with a waterproof electronics unit casing to protect the electronic circuitry against humidity, water spray and other potentially harmful environmental agents.

• High Level of Detection Uniformity

• Leading Edge Technology

• Easy to Install and Use

• Suitable for Portable Applications

• No Maintenance Required

• Affordable Pricing

 The Classic is a Walk-Through Metal Detector designed and engineered to meet the specific security needs of public facilities such as schools, hotels, amusement parks and city halls.

The Classic Metal Detector combines the required Security with a high level of operating efficiency. The leading edge technology features a high flow rate of people through the gate with the minimum number of nuisance alarms, as personal effects such as coins, keys and belt buckles can pass through the magnetic field without causing an alarm.

The Classic Metal Detector is compact and lightweight, making this portable unit adaptable to any surroundings. The patented cylinder design is aesthetically suitable for the most discrete applications.

This security equipment does not require any special training for normal use, making this the most ‘user friendly walk-through metal detector in the industry.

CEIA Metal Detectors have been selected by the leading security agencies worldwide to protect high-ranking government officials. The Classic conforms to all International Security Standards and is capable of detecting both magnetic and non-magnetic weapons.

When security, operating efficiency and affordable pricing are required, the CEIA Classic Metal Detector is the obvious solution.
 

• High Level of Detection Uniformity

• Leading Edge Technology

• Easy to Install and Use

• Suitable for Portable Applications

• No Maintenance Required

• Affordable Pricing

• Complete Security Detection

• High Discrimination

• Very High Speed of Detection

• Direct Selection of the International Security Standards

• High Reliability

• Aesthetically Innovative

• Local or Remote Programming with Networking Capability

• Available in Outdoor Version, waterproof degree IP55

PMD2, acronym for Programmable Metal Detector, is the most advanced CEIA application with an international patent of its own. It generates an electromagnetic scanning field for the detection of metallic weapons inside a monitored passage. Thanks to this technology, the PMD2 Metal Detector allows weapons to be accurately located on people in transit, considerably speeding up search operations.
A “height on person“ display actually indicates, by means of illuminated LED’s, the position of the weapon on the person. The location zones are not fixed, as in the case of metal detectors with multiple receiver-transmitter coils, but are variable and continuous so as to achieve optimum resolution. PMD2 can be supplied, on request, with two emergency batteries that automatically come into operation in the event of a mains failure.
PMD2 is available in panel (PMD2/PTZ) or column (PMD2/ENZ) version. Also an outdoor column version, PMD2/EWZ, is offered with an IP55 degree of protection.

The Most Advanced Multi-Zone Metal Detector for Law Enforcement and Correction Facilities

SMD 601 Multi Zone

The main features of the SMD 601 Multi-zone Metal Detector are its very High Sensitivity to all metal objects, magnetic and non-magnetic, including those in stainless steel; the speed of analysis, which allows search precision superior to that achieved with other detectors in only two seconds; extremely accurate pinpointing of the positions of either single or multiple metal objects detected; and its superior immunity to electrical and mechanical interference due to metal structures in the surrounding area, which allows full operation of the device in any location, even at high levels of sensitivity.

• Very High Sensitivity to magnetic and non-magnetic metals and to stainless steel

• Complies with new Standard NIJ-0601.02

• Quick, accurate analysis of all parts of the body of people in transit

• Very accurate pinpointing of individual and multiple metal masses

• Extremely high level of immunity to electrical and mechanical interference

The CEIA SMD601TM is a Multi-Zone Walk-Through Metal Detector specifically designed to comply with the new NIJ Standard-0601.02 (U.S. Dep. of Justice). The Standard establishes new requirements of Sensitivity, Discrimination and Immunity for Law Enforcement and Correctional Facilities.

This is an extremely sensitive device for the detection of conventional weapons, such as pistols and knives, as well as small, hard-to-find items, normally difficult to detect, that could be considered a threat to officer and prisoner safety.

The three levels of Security specified by the Standard (Large, Medium and Small object size) are pre-loaded in the Metal Detector, and can be selected directly by the user via a simple operation at the control unit.

A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of the need for manual searches. The Anti-Vandalism Control Unit (IP55 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords.
 

• High Level of Detection Uniformity

• Very High Discrimination

• Highly Visible Display provides Single or Multiple Location of Weapons in Transit

• Fast Programming through an Exclusive Chip Card System

• High Immunity to External Interferences

• Local or Remote Programming with Networking Capabilities

HI-PE Multi Zone
High Performance Metal Detector

• Immediate selection of International Security Standards.
• Detection of magnetic, non-magnetic and mixed alloys metal weapons.
• High detection speed: up to 15 m/s (45 ft/s).
• Very high immunity to both electrical and mechanical interference.
• Programmable operation controlled by microprocessor.
• Programming: via built-in keypad and display or RS232/RS485 serial connection to Remote Control Unit (RCU), PC or computer network.
• Programming access protected by a mechanical lock and two alphanumeric passwords.
• Cable-free automatic synchronization between two or more Metal Detectors at a minimum distance of 5 cm (2 inches) from each other.
• High-integration professional electronics and maximum reliability.
• Control unit incorporated into the detector.
• No need for initial or periodic calibration.
• Easy maintenance: modular control unit for a rapid replacement.
• Color: light grey RAL 7040.

Very High Sensitivity Metal Detector

SMD 600 Multi Zone

Its extremely high sensitivity and immunity to external interference make this model ideal for top-security applications, especially in penitentiaries and wherever detection of minimum-dimension metal masses is required.

The CEIA SMD600 Multi Zone is a new-generation ultra-high sensitivity Walk-Through Metal Detector designed to satisfy the strictest security requirements, especially in penitentiaries and other applications where the detection of extremely small metal masses is required (for example: loss prevention), even if hidden in body cavities. It meets all International Security Standards currently adopted in public and private installations.
The SMD600 Multi Zone is characterized by very high immunity to electrical interference in the surrounding environment as well as mechanical vibrations; as a result, it can be installed in those environments where the standard Metal Detectors could not be installed before.
A full-height light bar displays the horizontal location of the detected metal masses in transit. This results in rapid identification of threat and a reduction, or elimination, of manual searches.
The Anti-Vandalism Control Unit (IP55 in stainless steel) is incorporated into the structure of the Metal Detector. Access to programming is protected both by a mechanical lock and by two alphanumeric passwords. The SMD600 Multi Zone is manufactured using the most advanced electronics technology, conforming to ISO 9001 Quality Control Standard procedures.
 

• Immediate selection of International Security Standards.
• Detection of magnetic, non-magnetic and mixed alloys metal weapons.
• All functions programmable and controlled by a microprocessor.
• Programming: via built-in keypad and display or RS232 serial connection to Remote Control Unit (RCU), a PC or a computer network.
• Programming access protected by both a mechanical lock and by two alphanumeric passwords.
• High speed of detection: up to 15 meters per second (45 ft/s).
• Very high immunity to electromagnetic and mechanical interference.
• Automatic synchronization between two or more metal detectors, at a distance of down to 5 cm, from each other, without using cables.
• Professional high integration and high reliability electronics.
• Control unit incorporated into the detector.
• No initial or periodic calibration.
• Easy maintenance: modular control unit for a rapid replacement.
• Color: light grey RAL 7040.